rpm
Revolutions per Minute- Description: engine revolutions per minute
- Format: numeric
- Unit: rpm
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 10000 rpm
- The RPM range was defined based on the maximum value that vehicles connected to mobway can reach, including a safety margin
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
oil_level
Oil Level- Description: amount of engine lubricating oil
- Format: numeric
- Unit: %
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 100%
- The oil level range was defined based on the default limit values
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
oil_remaining_life
Oil Remaining Life- Description: percentage of remaining engine oil life
- Format: numeric
- Unit: %
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 100%
- The oil remaining life range was defined based on the default limit values
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
oil_remaining_life_status
Oil Remaining Life Status- Description: status of the remaining engine oil life
- Format: categorical
- Values:
- extremely low
- Description: indicates that the remaining engine oil life status is extremely low
- low
- Description: indicates that the remaining engine oil life status is low
- normal
- Description: indicates that the remaining engine oil life status is normal
- unknown
- Description: indicates that the remaining engine oil life status is unknown
- extremely low
- Example:
engine_coolant_temperature
Engine Coolant Temperature- Description: engine coolant temperature
- Format: numeric
- Unit: °C
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: -15°C to 150°C
- The minimum engine coolant temperature value was defined based on the lowest ambient temperature reached in Brazil, including a safety margin. The maximum engine coolant temperature value was defined based on commonly reached maximum values, including a safety margin
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
total_engine_idle_time
Total Engine Idle Time- Description: total time the engine is on while the vehicle is stopped
- Format: numeric
- Unit: s
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 100000000 s
- The limit for total engine idle time was defined based on the equivalent of 8 hours per day over 10 years
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Minimum and maximum variation: 0 and (1.1x + 2)s per second
- The minimum and maximum variations for total engine idle time were defined to disregard minor inaccuracies
- Data with variation outside the allowed limit compared to the previous data point is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
total_engine_run_time
Total Engine Run Time- Description: total time the engine is on while the vehicle is moving
- Format: numeric
- Unit: s
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 300000000 s
- The limit for total engine run time was defined based on the equivalent of 24 hours per day over 10 years
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Minimum and maximum variation: 0 and (1.1x + 2)s per second
- The minimum and maximum variations for total engine run time were defined to disregard minor inaccuracies
- Data with variation outside the allowed limit compared to the previous data point is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example:
engine_air_filter_diagnostic
Engine Air Filter Diagnostic- Description: indicates the fault affecting the engine air filter
- Format: categorical
- Values:
- blocked
- Description: indicates that the engine air filter is blocked
- inactive
- Description: indicates that the engine air filter is inactive. All data related to the engine air filter should be ignored
- indeterminate issue
- Description: indicates that an indeterminate issue was found in the engine air filter
- missing
- Description: indicates that the engine air filter was not detected
- ok
- Description: indicates that the engine air filter is ok
- other
- Description: indicates that the vehicle sent a signal from a category not mapped by mobway
- blocked
engine_air_filter_status
Engine Air Filter Status- Description: indicates the engine air filter status
- Format: categorical
- Values:
- disabled feature
- Description: indicates that data related to the engine air filter is disabled
- invalid feature
- Description: indicates that data related to the engine air filter is invalid
- ok
- Description: indicates that the engine air filter is ok
- change now
- Description: indicates that the engine air filter should be changed now
- change soon
- Description: indicates that the engine air filter should be changed soon
- other
- Description: indicates that the vehicle sent a signal from a category not mapped by mobway
- disabled feature
engine_air_filter_remaining_life
Engine Air Filter Remaining Life- Description: estimate of how worn the engine air filter is
- Format: numeric
- Unit: %
- Decimal places: 2
- The data processed by mobway will always have at most 2 decimal places. However, the precision of the original data depends on the automaker. The data may have fewer than 2 decimal places when it ends in 0 due to automatic float formatting
- Range: 0 to 100%
- The engine air filter remaining life range was defined based on the default limit values
- Data outside this range is considered invalid
- The value is replaced with a null value
- A flag is generated to indicate the error and the original value, using the following format:
- Missing data
- A flag is generated to indicate that the original data was missing, using the following format:
- Example: